Ramonol Speed - trial data
I used it on brand new hubs and bearings on my Indispension trailer which is used to carry an Orkney Coastliner. Total weight of boat, engines, trailer, fuel etc is about 400kg. I have now had about 15 trips with the boat. The distance to the slipway from my house is about 25 miles so, in total, the trailer has done about 600 - 700 miles. As the slipway at Invergordon is quite shallow I have to submerge the trailer wheels in order to get the boat off. I usually wait about 10 minutes to let the hubs cool down before putting it into the water. Inspections of the wheel bearings show very little water ingress and no discolouration or degradation of the grease. Wheels are still running very smoothly and silently. I am very impressed with this product and would be greatly obliged if you can tell me if its available on the market yet - I would be keen to buy it when it becomes available.
Cheers
Gerry
Testimonials
Please share your experiences using Ramonol White and Ramonol Advanced with us. Simply send to info@gruebb.com
Motocross
"I have raced motocross for 9 years, and do all work on my own bikes. I am a good mechanic, that doesn't compromise on the products I use. I found that many greases I used just couldn't stand up to the constant power washes, and the extreme conditions of riding. Many important components corroded in a short time.
I have used Ramonol Advance for over a year and the results are absolutely fantastic. On components such as steering bearings, pivots, and other components that suffer from corrosion, time between service has doubled and even trebled in some cases. The components have NO signs of corrosion, and the grease stays where it's needed. It's a fantastic product for all motorcycles and mechanics.
James, one very satisfied customer of Ramonol Advance.
Hercules CSMD
We have used Ramonol Advanced on our Deck Hatches for several years and found it perfect for our needs. We now use it exclusively & recommend its ongoing use – to the point whereby we supply a sample tube of Ramonal Advanced with every Hatch that leaves the factory. I would have no hesitation in recommending Ramonal Advanced to anyone looking for a Waterproof Marine Grease.
Barry Hollis Rigging
We are now using Ramonol Advanced on all types of furling gear and rigging screws but in addition we have found it is an excellent insulator when used to prevent seizure of stainless and alloy. We now use it instead of the yellow chromate we used to use.
J. M. - Oyster 56 owner
I was introduced to Ramonol Advanced as part of the trials programme three years ago. All the winches, davits, steering gear, bearings and seacocks were cleaned and re-greased with Ramonol Advanced. It was also used to repack the Max prop. Since then the boat has done a double transatlantic trip and many miles in European waters. Everything is still running smoothly with no more attention than pumping new grease in to the Max prop annually. I am very impressed with the product as it has meant a lot less annual maintenance.
Ramonol Advanced on Trawlers
Clacton Fisheries have used Ramonol Advanced for nearly a year on winches, winch ropes, propshafts, etc on board their trawler and report it is "the best yet."