Solicitar una cotización
X
Banner Image of production lubricants

Produktion Schmierstoffe

Gruebb sind in Europa und den USA als Hersteller von Hochleistungs-Rohrziehern aus Edelstahl bekannt. Diese Schmierstoffe und Pasten werden in Zusammenarbeit mit Herstellern entwickelt, die von einer maßgeschneiderten Lösung für ihre Prozesse und Materialien profitieren. Maßgeschneiderte Produkte sind besonders kostengünstig und Reinigungssysteme bleiben effizient.

  • S. No.
  • Product Name
  • Description
  • Technical Datasheet
  • Safety Datasheet
  • Contact Us

Rohrzeichnung - Weißmetalle

  • 1
  • GRUEBB 4000
  • Seamless stainless steel tube drawing oil. High viscosity for medium sized tube. Up to 35% reductions. Used at the UK's largest stainless steel mill for over 5 years. Cost effective and reliable. Cleanable with solvent cleaners. Alternative to Houghton Tube Lubricant CR40.
    Read More Close
  • download product technical data sheets
  •  
  • click here to open enquiry form
  • 2
  • GRUEBB 4099
  • Ultra high performance chlorinated drawing oil for white metal tubes. Replaced 5 different I/d and o/d lubricants at a major US plant, one of which was an evaporable pre-coating.  Drawing speeds increased, die life improved and Ra was lowered.   Gruebb 4099 is cleanable with an alkaline-water wash, though can also be cleaned with Dowclene 1601 types or solvents.  A game changer.
    Read More Close
  • download product technical data sheets
  • download health and safety data sheets
  • click here to open enquiry form
  • 3
  • Gruebb 4426
  • Chlorinated tube and rod drawing oil of medium viscosity ~ 1000cSt at 40degC. Alternative to Houghton's Tube Lubricant CR45.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 4
  • Gruebb 4427
  • High quality chlorinated drawing oil for stainless steel tubes 304L, 316L, Duplex and super Duplex alloys. Cost effective and reliable. Solvent cleanable. Alternative to Metodraw G-100 and Hangsterfer's J-1.
    Read More Close
  • download product technical data sheets
  • download health and safety data sheets
  • click here to open enquiry form
  • 5
  • Gruebb CR
  • Special solvent deposited film for severe reductions of circa 50%. An evaporable fluid leaving a plastic/rubber coating for heavy duty stainless steel tube drawing. Environmentally friendly solvent. Similar performance to Hangsterfer's P46.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 6
  • Gruebb FT230
  • Cold pilgering lubricant, chlorine free, proven in stainless steel tube productuon. kV at 40degC 230cSt. Alternative to Houghton Tube Lubricant CF230.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Rohrzeichnung - Kupfer

  • 7
  • Gruebb 5001
  • Copper tube drawing oil ~5000cSt at 40degC. Proven over 5 years in service with one of the world's largest manufacturer of copper tube.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 8
  • Gruebb 5118
  • Vanishing and straightening oil for copper tube production.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 9
  • Gruebb 5170
  • Drawing, forming and stamping lubricant of viscosity 70cSt at 40degC. High lubricity and cost effective. Can be used for aluminium drawing, copper sheet forming, copper tube drawing, ferrous and non-ferrous stamping and general forming applications.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Rohrbiegen

  • 10
  • Ziedol HC 70
  • Tube bending resin for general usage. Simply heat above melting point of ~70degC, pour into tubes prior to bending, let set then bend. Provides wall support during bending operations. Removed by simply heating the tube and removing the flexible rod and then washing the tube with water to remove any traces.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 11
  • Ziedol HC 88
  • Hard meltable "plastic" tube bending compound designed for hard metal bending eg Nickel stainless steels. Melting range 83-88degC. Re-usable.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Stab- und Drahtziehen

  • 12
  • Gruebb 3878
  • High performance drawing oil recommended for single and multi-pass wire drawing, rod and bar drawing, skin pass drawing prior to cold heading and tube drawing. Contains chlorine and active sulphur. Avoid yellow metals. Used in reductions up to 25%
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 13
  • Gruebb 4147
  • Medium viscosity, high EP chlorinated oil for shaped white metal rod reductions.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 14
  • Gruebb 4392
  • Medium-high viscosity, high EP chlorinated oil for shaped white metal rod reductions.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 15
  • Gruebb R1000
  • Rod, tube and wire drawing oil. kv @ 40degC 1000 cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 16
  • Gruebb R3000
  • Rod, tube and wire drawing oil. kv @ 40degC 3000cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 17
  • Gruebb R5000
  • Rod, tube and wire drawing oil. kv @ 40degC 5000cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 18
  • Gruebb W40
  • Stainless steel wire drawing oil. 40% chlorine content. kV at 40degC 98.6cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 19
  • Gruebb W48
  • Stainless steel wire drawing oil. 48% chlorine content. kV at 40degC 4500cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 20
  • Gruebb W52
  • Stainless steel wire drawing oil. 52% chlorine content. kV at 40degC 3300cSt.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Ordentlich schneidende Öle

  • 21
  • B22
  • Compounded neat cutting oil kV at 40degC 22cSt. Ideal for machining ductile matels such as copper and aluminium alloys. Alternative to BP Bezora 122.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 22
  • B32
  • Compounded neat cutting oil with kV at 40degC 32cSt. Ideal for machining ductile metals.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 23
  • CL11
  • Sulpho-chlorinated honing oil of 11cSt at 40degC for honing tough ferrous metals. Low cost aternative to BP Cilora 211.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 24
  • CL20A
  • Chlorinated neat cutting oil of 20cSt at 40degC containing active sulphur for arduous machining. Low cost alternative to BP Cilora 119.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 25
  • CL22
  • Chlorinated neat oil of 22cSt at 40degC for deep hole drilling, general machining etc.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 26
  • CL28
  • Chlorinated neat oil of 28cSt at 40degC for deep hole drilling, general machining etc. Low cost alternative to BP Cilora 128.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 27
  • CL70
  • Highly chlorinated neat oil of 70cSt at 40degC for fine blanking of lower carbon steels to thickness 6mm. Low cost alternative to BP's Cilora 170.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 28
  • Naturyl AL3
  • A low viscosity 3cSt at 40degC, low odour, low mist aluminium cutting oil designed for general usage on precision parts. 59% renewable content.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 29
  • Naturyl AL40
  • A medium viscosity 40cSt at 40degC, low odour, low mist aluminium cutting oil designed for general usage and light formng operations. >70 renewable content.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 30
  • Naturyl AL8
  • A low viscosity 8cSt at 40degC, low odour, low mist aluminium cutting oil designed for general usage. > 60% renewable content.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 31
  • S10A
  • Deep hole boring lubricant for Ejector/BTA methods. Contains active sulphur so avoid use with yellow metals. Low cost alternative to BP Sevora 109.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 32
  • S24
  • A medium viscosity EP oil for light gear cutting and general machining on ferrous and non-ferrous alloys. Low cost alternative to BP Sevora 124.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 33
  • S24Plus
  • Good EP performance and excellent lubricity characteristics make S24Plus idea for a general workshop machining many types of metals.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 34
  • S70A
  • Suited for arduous machining of tough and difficult non-free cutting steels. Suitable for threading and tapping, slotting and gear cutting. Contains active sulphur so should not be used with yellow metals. Low cost alternative to BP Sevora 169.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Pressearbeit

  • 35
  • Gruebb AL101
  • Emulsifiable aluminium punching, pressing and cutting fluid.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 36
  • Gruebb S6200
  • Deep drawing, punching and pressing oil for steel and stainless steel. Particularly effective cupping stainless sheet.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 37
  • Gruebb S6200W
  • Drawing and wall ironing oil possessing excellent performance when pressing stainless steel sheet into complex shape. Contains surfactants to aid washing in aqueous cleaning systems.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Kaltöl

  • 38
  • Gruebb AP6021
  • Cold heading oil for steel nuts and bolts. Low/medium viscosity of 20cSt at 40degC.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 39
  • Gruebb AP6061
  • Cold heading oil for steel nuts and bolts. Medium viscosity of 60cSt at 40degC.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 40
  • Gruebb AP6081
  • Cold heading oil for steel nuts and bolts. Medium viscosity of 80cSt at 40degC.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 41
  • Gruebb AP6201
  • Cold heading oil for steel nuts and bolts. High viscosity of 200cSt at 40degC.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 42
  • Gruebb AP8024
  • Stainless steel nut and bolt cold heading lube. Low/medium viscosity oil, 24cSt at 40degC, chlorinated and with lubricity additives.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 43
  • Gruebb AP8060
  • Stainless steel nut and bolt cold heading lube. Medium viscosity oil, 60cSt at 40degC, chlorinated and with lubricity additives.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 44
  • Gruebb AP8080
  • Stainless steel nut and bolt cold heading lube. Medium viscosity oil, 80cSt at 40degC, chlorinated and with lubricity additives.
    Read More Close
  •  
  •  
  • click here to open enquiry form
  • 45
  • Gruebb AP8200
  • Stainless steel nut and bolt cold heading lube. Higher viscosity oil, 200cSt at 40degC, chlorinated and with lubricity additives.
    Read More Close
  •  
  •  
  • click here to open enquiry form

Fallstudien

Fallstudien Das richtige Fett ist wichtig

Wenn Sie denken, dass Fett nur Fett ist, könnten Sie nicht falscher liegen. Es gibt viele Arten von Fett Chemie und wenn Sie nicht die richtige sind, werden Sie wahrscheinlich zahlen, um Teile unnötig zu ersetzen, sowie mit mehr Wartung zu tun. Das richtige Fett für den Job spart Ihnen Zeit und bietet einen größeren Schutz für die Geräte/ Armaturen, auf die Sie sich verlassen. Allerdings muss auch auf Kompatibilitätsprobleme geachtet werden, die entstehen können, wenn Sie Fettarten mischen - es ... Weiterlesen

Alle Fallstudien anzeigen
X